Idea
In short
How do you build an RTC alarm clock?
A low-power clock chip raises an alarm at a set time and wakes the board, with a buzzer and a small display. You need Arduino Nano, PCF8563 RTC, Passive buzzer, SSD1306 OLED Display, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a real-time clock alarm.
Parts list
- Development Boards
- Integrated Circuits
- Motors & Actuators
- Displays
- Switches
- Prototyping
How to build it
- Wire the clock
- Set the time
- Set an alarm register
- Read the alarm flag
- Beep and clear it
Common questions
What parts do I need for the RTC alarm clock?
Arduino Nano, PCF8563 RTC, Passive buzzer, SSD1306 OLED Display, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
How long does the RTC alarm clock take to build?
About 210 minutes for a intermediate maker.
