Projects / Ideas / Dual-core sampler on a Pico

Dual-core sampler on a Pico

AdvancedLearningIdeaReviewed
In short

How do you build a dual-core sampler on a Pico?

One core samples an analog pin quickly while the other formats and prints the data. You need Raspberry Pi Pico H, Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use both cores of a Pico.

How to build it

  1. Read the ADC in a fast loop on core one
  2. Send values through a queue
  3. Format on core two
  4. Show the rate
  5. Measure the maximum sample rate

Related projects

Common questions

What parts do I need for the dual-core sampler on a Pico?

Raspberry Pi Pico H, Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the dual-core sampler on a Pico take to build?

About 300 minutes for a advanced maker.