Idea
In short
How do you build a pico clock with a DS3231?
A Pico reads a DS3231 clock chip with MicroPython and shows the time and date on an OLED, with two buttons to set the time. A coin cell keeps the time; fit it correctly and never charge it. You need Raspberry Pi Pico H, DS3231 RTC module, SSD1306 OLED Display, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Practise I2C with two devices on one bus.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Scan the I2C bus for both devices
- Read the time registers
- Convert from BCD
- Draw the time and date
- Set hours and minutes with two buttons
Related projects
Common questions
What parts do I need for the pico clock with a DS3231?
Raspberry Pi Pico H, DS3231 RTC module, SSD1306 OLED Display, Tactile push button 6 mm × 2 and Breadboard 830 Tie Points.
How long does the pico clock with a DS3231 take to build?
About 150 minutes for a intermediate maker.
