Projects / Ideas / Pico line follower car

Pico line follower car

AdvancedRoboticsIdeaReviewed
In short

How do you build a pico line follower car?

A Pico with two TCRT5000 reflective sensors and a TB6612FNG driver steers two small motors to follow a black line on a white floor. Power the motors from their own battery pack. You need Raspberry Pi Pico H, TCRT5000 IR reflective sensor module × 2, TB6612FNG Motor Driver, N20 micro metal gear motor × 2, 9 V battery and Breadboard 830 Tie Points.

Level
Advanced
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Follow a black line with two sensors.

Parts list

How to build it

  1. Test each sensor on black and white
  2. Wire the driver and motors
  3. Drive straight
  4. Steer by which sensor sees the line
  5. Tune the speed

Related projects

Common questions

What parts do I need for the pico line follower car?

Raspberry Pi Pico H, TCRT5000 IR reflective sensor module × 2, TB6612FNG Motor Driver, N20 micro metal gear motor × 2, 9 V battery and Breadboard 830 Tie Points.

How long does the pico line follower car take to build?

About 210 minutes for a advanced maker.