Idea
In short
How do you build a raspberry Pi 5 analog dashboard?
A Raspberry Pi 5 reads three potentiometers through an MCP3008 over SPI and shows live bars in the terminal, adding the analog inputs the Pi does not have. Shut down before changing wiring. You need Raspberry Pi 5 (8 GB), MCP3008 8-channel 10-bit ADC, Potentiometer 10 kΩ × 3 and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Give the Pi analog inputs with an ADC chip.
Parts list
- Single Board Computers
- Integrated Circuits
- Passives
- Prototyping
How to build it
- Enable SPI on the Pi
- Wire the converter and the three knobs
- Read each channel
- Convert to volts
- Draw live bars in the terminal
Common questions
What parts do I need for the raspberry Pi 5 analog dashboard?
Raspberry Pi 5 (8 GB), MCP3008 8-channel 10-bit ADC, Potentiometer 10 kΩ × 3 and Breadboard 830 Tie Points.
How long does the raspberry Pi 5 analog dashboard take to build?
About 140 minutes for a intermediate maker.
