Idea
In short
How do you build an eight-knob controller?
An MCP3008 adds eight analog inputs to a Pico so eight knobs can control a synth or lights. You need Raspberry Pi Pico H, MCP3008 8-channel 10-bit ADC and Potentiometer 10 kΩ × 8.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read many analog inputs through SPI.
Parts list
- Development Boards
- Integrated Circuits
- Passives
How to build it
- Wire the ADC over SPI
- Read all eight channels
- Smooth them
- Send as serial messages
- Use them to control a project
Common questions
What parts do I need for the eight-knob controller?
Raspberry Pi Pico H, MCP3008 8-channel 10-bit ADC and Potentiometer 10 kΩ × 8.
How long does the eight-knob controller take to build?
About 120 minutes for a intermediate maker.
