Idea
In short
How do you build an ADC resolution and noise lab?
Compare 8, 10 and 12-bit readings of the same voltage and measure the noise. You need Arduino Uno R3, Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See how resolution and averaging change results.
Parts list
- Development Boards
- Passives
- Passives
- Prototyping
- Prototyping
How to build it
- Read a steady voltage many times
- Calculate mean and spread
- Add an RC filter
- Compare with and without averaging
- Plot a histogram
Related projects
Common questions
What parts do I need for the ADC resolution and noise lab?
Arduino Uno R3, Potentiometer 10 kΩ, Ceramic Capacitor 100 nF, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the ADC resolution and noise lab take to build?
About 150 minutes for a intermediate maker.
