Idea
In short
How do you build a vehicle type counter with Pi AI HAT+?
A Pi 5 with the AI HAT+ counts cars, bikes, buses and autos on a road in real time. You need Raspberry Pi 5, Raspberry Pi AI HAT+ (26 TOPS), SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3 and Raspberry Pi 5 Active Cooler.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use an AI accelerator to run larger models fast.
Parts list
- Single Board Computers
- SBC Accessories
- SBC Accessories
- SBC Accessories
- SBC Accessories
- SBC Accessories
How to build it
- Install the accelerator software
- Run a detection model on the HAT
- Track vehicles across frames
- Count each class
- Log counts every 15 minutes
Common questions
What parts do I need for the vehicle type counter with Pi AI HAT+?
Raspberry Pi 5, Raspberry Pi AI HAT+ (26 TOPS), SanDisk microSD card 32 GB (A1, Class 10), Raspberry Pi 27 W USB-C power supply, Raspberry Pi Camera Module 3 and Raspberry Pi 5 Active Cooler.
How long does the vehicle type counter with Pi AI HAT+ take to build?
About 300 minutes for a advanced maker.
