Components / Raspberry Pi and Jetson / Raspberry Pi AI HAT+ (26 TOPS)

Raspberry Pi AI HAT+ (26 TOPS)

Hailo-8 AI accelerator on a HAT for the Raspberry Pi 5.

FunctionNeural network accelerator, Hailo-8
InterfacePCIe 2.0/3.0 x1 via the Pi 5 FPC
Rating26 TOPS
SBC AccessoriesReviewedUsed in 2 projects
RASPBERR
In short

What is the Raspberry Pi AI HAT+ (26 TOPS) and what is it used for?

Hailo-8 AI accelerator on a HAT for the Raspberry Pi 5. Makers use it for real-time object detection on a Pi 5.

How it works

A Hailo-8 neural network accelerator rated at 26 TOPS, connected over PCIe.

Key specifications

Interface module specValue
FunctionNeural network accelerator, Hailo-8
InterfacePCIe 2.0/3.0 x1 via the Pi 5 FPC
Rating26 TOPS

Pinout

PCIe FFCTo the Pi 5 PCIe connector
40-pinPass-through header

How to use it

Pi 5 only. Install the hailo-all package, set PCIe to Gen 3 in config.txt (dtparam=pciex1_gen=3) and try the rpicam-apps Hailo examples for object detection and pose estimation.

Applications

Alternatives

Buy at

Common questions

What is the Raspberry Pi AI HAT+ (26 TOPS) used for?

In maker projects: real-time object detection on a Pi 5.

How does the Raspberry Pi AI HAT+ (26 TOPS) work?

A Hailo-8 neural network accelerator rated at 26 TOPS, connected over PCIe.

How do I connect the Raspberry Pi AI HAT+ (26 TOPS) to an Arduino or ESP32?

PCIe 2.0/3.0 x1 via the Pi 5 FPC. Pins: PCIe FFC (To the Pi 5 PCIe connector), 40-pin (Pass-through header).

What can I use instead of the Raspberry Pi AI HAT+ (26 TOPS)?

Raspberry Pi AI Kit (13 TOPS) and Raspberry Pi AI Camera.