Raspberry Pi 5 Active Cooler
Clip-on heatsink and fan for the Raspberry Pi 5.
FunctionHeatsink with PWM fan
Interface4-pin fan connector on Pi 5
RatingFan speed controlled by the Pi
SBC AccessoriesReviewedMPN SC1148Used in 8 projects
In short
What is the Raspberry Pi 5 Active Cooler and what is it used for?
Clip-on heatsink and fan for the Raspberry Pi 5. Makers use it for stops Pi 5 throttling under load.
How it works
An aluminium heatsink with thermal pads and a blower fan driven by PWM from the Pi.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Heatsink with PWM fan |
| Interface | 4-pin fan connector on Pi 5 |
| Rating | Fan speed controlled by the Pi |
Pinout
FAN4-pin JST plug for the Pi 5 fan header
ClipsTwo spring pins into the board's holes
How to use it
Peel the protective film, push the clips into the two mounting holes and plug in the fan. The Pi controls the fan speed by temperature. It stops the Pi 5 throttling under full load.
Applications
Stops Pi 5 throttling under load
Builds that use it
Alternatives
- Raspberry Pi 5 official caseCase with its own fan
Common questions
What is the Raspberry Pi 5 Active Cooler used for?
In maker projects: stops Pi 5 throttling under load.
How does the Raspberry Pi 5 Active Cooler work?
An aluminium heatsink with thermal pads and a blower fan driven by PWM from the Pi.
How do I connect the Raspberry Pi 5 Active Cooler to an Arduino or ESP32?
4-pin fan connector on Pi 5. Pins: FAN (4-pin JST plug for the Pi 5 fan header), Clips (Two spring pins into the board's holes).
What can I use instead of the Raspberry Pi 5 Active Cooler?
Raspberry Pi 5 official case.
