Idea
In short
How do you build a light-gate timer for a rolling ball?
An infrared emitter and a phototransistor make a gate; the board times how long a ball takes between two gates and shows speed. You need Arduino Nano, Phototransistor L14F1 / PT333 × 2, IR LED 940 nm (5 mm) × 2, Resistor 220 Ω × 2, Resistor 10 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Time an object between two gates.
Parts list
- Development Boards
- Optoelectronics
- Optoelectronics
- PassivesResistor 220 Ω × 2
- PassivesResistor 10 kΩ × 2
- Displays
- Prototyping
How to build it
- Build one gate and test it
- Build the second gate
- Time between the two beams
- Convert to speed
- Show the result
Common questions
What parts do I need for the light-gate timer for a rolling ball?
Arduino Nano, Phototransistor L14F1 / PT333 × 2, IR LED 940 nm (5 mm) × 2, Resistor 220 Ω × 2, Resistor 10 kΩ × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the light-gate timer for a rolling ball take to build?
About 270 minutes for a intermediate maker.
