Idea
In short
How do you build a settings stored in an I2C EEPROM?
Save a brightness value and a counter in an external memory chip so they survive a power cycle, then see how many writes the chip allows. You need Arduino Nano, 24C02 / AT24C256 EEPROM, Tactile push button 6 mm × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Store settings in an EEPROM chip.
Parts list
- Development Boards
- Integrated Circuits
- Switches
- Displays
- Prototyping
How to build it
- Find the chip address
- Write one byte
- Read it back after power off
- Add up and down buttons
- Save only when the value changes
Common questions
What parts do I need for the settings stored in an I2C EEPROM?
Arduino Nano, 24C02 / AT24C256 EEPROM, Tactile push button 6 mm × 2, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the settings stored in an I2C EEPROM take to build?
About 120 minutes for a beginner maker.
