Idea
In short
How do you build an etch a PCB at home?
Transfer a laser-printed layout onto copper board with an iron, etch it and drill the holes. You need Copper clad board (single side) 10 × 15 cm, Ferric chloride (PCB etchant), Mini drill (PCB, 12 V), Isopropyl alcohol 99 % (flux cleaner) and Anti-static wrist strap.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a PCB by hand.
Parts list
- Prototyping
- Prototyping
- Tools & Instruments
- Tools & Instruments
- Tools & Instruments
How to build it
- Print the mirrored layout on glossy paper
- Iron it onto clean copper
- Etch in ferric chloride with gloves and goggles
- Remove toner and drill
- Dispose of etchant safely
Common questions
What parts do I need for the etch a PCB at home?
Copper clad board (single side) 10 × 15 cm, Ferric chloride (PCB etchant), Mini drill (PCB, 12 V), Isopropyl alcohol 99 % (flux cleaner) and Anti-static wrist strap.
How long does the etch a PCB at home take to build?
About 120 minutes for a intermediate maker.
