Projects / Ideas / Wandering light pointer

Wandering light pointer

BeginnerGames & ToysIdeaReviewed
In short

How do you build a wandering light pointer?

A pan-tilt bracket moves a small red LED spot in random patterns on a wall, for a pet to chase. Use an LED, not a laser, and never aim at eyes. You need Arduino Nano, Servo pan-tilt bracket (SG90), LED 5 mm red, Resistor 220 Ω, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

Level
Beginner
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Move a pointer with two servos.

Parts list

How to build it

  1. Assemble the bracket
  2. Wire both servos
  3. Move to random points
  4. Add smooth easing
  5. Stop after a few minutes

Related projects

Common questions

What parts do I need for the wandering light pointer?

Arduino Nano, Servo pan-tilt bracket (SG90), LED 5 mm red, Resistor 220 Ω, 5 V 2 A USB adapter and Breadboard 830 Tie Points.

How long does the wandering light pointer take to build?

About 180 minutes for a beginner maker.