Idea
In short
How do you build a cat laser toy?
Two servos move a low-power laser dot around a room in random patterns for cats. You need Arduino Nano, Servo pan-tilt bracket (SG90), Laser diode module 5 V (red, 650 nm) and DS3231 RTC module.
- Level
- Beginner
- Time
- About 60 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make random motion with servos.
Parts list
- Development Boards
- Motors & Actuators
- Optoelectronics
- Sensors
How to build it
- Mount the laser
- Move randomly with pauses
- Stop after 10 minutes
- Keep the beam low and away from eyes
- End with a treat
Common questions
What parts do I need for the cat laser toy?
Arduino Nano, Servo pan-tilt bracket (SG90), Laser diode module 5 V (red, 650 nm) and DS3231 RTC module.
How long does the cat laser toy take to build?
About 60 minutes for a beginner maker.
