Idea
In short
How do you build an optical encoder motor speed?
A slotted disc and an optical sensor measure the speed of a small motor and hold it with a simple loop. You need Arduino Nano, Optical encoder speed sensor (slot, LM393), DC motor 130 size (toy motor), MOSFET IRLZ44N, Rectifier Diode 1N4007, 9 V battery and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Close a speed loop.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Semiconductors
- Batteries
- Prototyping
How to build it
- Count slots per second
- Convert to RPM
- Drive the motor with PWM
- Add a proportional controller
- Test with load
Common questions
What parts do I need for the optical encoder motor speed?
Arduino Nano, Optical encoder speed sensor (slot, LM393), DC motor 130 size (toy motor), MOSFET IRLZ44N, Rectifier Diode 1N4007, 9 V battery and Breadboard 830 Tie Points.
How long does the optical encoder motor speed take to build?
About 270 minutes for a intermediate maker.
