Projects / Ideas / Build an H-bridge from transistors

Build an H-bridge from transistors

AdvancedMotionIdeaReviewed
In short

How do you build a build an H-bridge from transistors?

Four transistors form an H-bridge so a small motor can run both ways, and you learn why a driver chip is better. You need BC337 NPN transistor (800 mA) × 2, BC327 PNP transistor (800 mA) × 2, Rectifier Diode 1N4007 × 4, Resistor 1 kΩ × 4, DC motor 130 size (toy motor), 9 V battery and Breadboard 830 Tie Points.

Level
Advanced
Time
About 270 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

See how an H-bridge works and fails.

Parts list

How to build it

  1. Draw the bridge
  2. Wire the four transistors
  3. Add flyback diodes
  4. Drive forward and reverse
  5. Test why both on at once is wrong

Related projects

Common questions

What parts do I need for the build an H-bridge from transistors?

BC337 NPN transistor (800 mA) × 2, BC327 PNP transistor (800 mA) × 2, Rectifier Diode 1N4007 × 4, Resistor 1 kΩ × 4, DC motor 130 size (toy motor), 9 V battery and Breadboard 830 Tie Points.

How long does the build an H-bridge from transistors take to build?

About 270 minutes for a advanced maker.