Idea
In short
How do you build a thermistor fan thermostat?
A thermistor starts a small fan when a box gets warm, with a gap between on and off to avoid chatter. You need Arduino Nano, NTC thermistor 10 kΩ (B3950), Resistor 10 kΩ, 5 V DC fan 40 mm, MOSFET IRLZ44N, Rectifier Diode 1N4007, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a fan with a thermistor.
Parts list
- Development Boards
- Sensors
- Passives
- Motors & Actuators
- Semiconductors
- Semiconductors
- Power
- Prototyping
How to build it
- Wire the thermistor divider
- Convert to degrees
- Drive the fan with a MOSFET
- Set on and off points
- Show the state with an LED
Common questions
What parts do I need for the thermistor fan thermostat?
Arduino Nano, NTC thermistor 10 kΩ (B3950), Resistor 10 kΩ, 5 V DC fan 40 mm, MOSFET IRLZ44N, Rectifier Diode 1N4007, 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the thermistor fan thermostat take to build?
About 210 minutes for a intermediate maker.
