Projects / Ideas / Case fan controller

Case fan controller

BeginnerHome LabIdeaReviewed
In short

How do you build a case fan controller?

A temperature sensor controls the speed of a small fan with PWM and shows the speed. You need Arduino Nano, 5 V DC fan 40 mm, MOSFET IRLZ44N, Rectifier Diode 1N4007, DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Beginner
Time
About 180 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control a fan by temperature.

Parts list

How to build it

  1. Read the temperature
  2. Map temperature to duty
  3. Drive the fan through a MOSFET
  4. Add a minimum start speed
  5. Show the duty and temperature

Related projects

Common questions

What parts do I need for the case fan controller?

Arduino Nano, 5 V DC fan 40 mm, MOSFET IRLZ44N, Rectifier Diode 1N4007, DS18B20 waterproof probe, Resistor 4.7 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the case fan controller take to build?

About 180 minutes for a beginner maker.