Projects / Ideas / Noise dose meter for workers

Noise dose meter for workers

IntermediateSafetyIdeaReviewed
In short

How do you build a noise dose meter for workers?

A clip-on meter adds up sound exposure through a shift and warns before it reaches unsafe levels. You need Seeed XIAO ESP32S3, MAX9814 microphone with AGC, 0.91 inch OLED 128x32 (I2C), Li-Po battery 3.7 V 2000 mAh and Vibration motor (coin type).

Level
Intermediate
Time
About 240 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure sound level and work out daily dose.

How to build it

  1. Measure RMS sound level each second
  2. Convert to approximate dB with a reference meter
  3. Add up dose using the 85 dB, 8-hour rule
  4. Vibrate at 80 % of the limit
  5. Treat it as an indicator, not a certified meter

Related projects

Common questions

What parts do I need for the noise dose meter for workers?

Seeed XIAO ESP32S3, MAX9814 microphone with AGC, 0.91 inch OLED 128x32 (I2C), Li-Po battery 3.7 V 2000 mAh and Vibration motor (coin type).

How long does the noise dose meter for workers take to build?

About 240 minutes for a intermediate maker.