Idea
In short
How do you build a touchscreen lamp controller?
A touch display with its own designer sets the colour and brightness of a lamp, so you design the screen without writing graphics code. You need Arduino Nano, Nextion 3.5 inch HMI display, WS2812B addressable RGB LED strip (1 m, 60 LEDs), 5 V 2 A USB adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 330 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use an HMI touch display.
Parts list
- Development Boards
- Displays
- Optoelectronics
- Power
- Prototyping
How to build it
- Design the screen in the editor
- Load it on the display
- Send a command from a touch
- Set the strip colour
- Add a brightness slider
Common questions
What parts do I need for the touchscreen lamp controller?
Arduino Nano, Nextion 3.5 inch HMI display, WS2812B addressable RGB LED strip (1 m, 60 LEDs), 5 V 2 A USB adapter and Breadboard 830 Tie Points.
How long does the touchscreen lamp controller take to build?
About 330 minutes for a intermediate maker.
