Components / Displays / Nextion 3.5 inch HMI display

Nextion 3.5 inch HMI display

Touch display with its own processor; you design screens in the Nextion editor.

TypeTFT HMI with resistive touch
Size3.5 inch
Resolution480 × 320
InterfaceUART
DisplaysReviewedMPN NX4832T035Used in 3 projects
23.4°CNEXTION
In short

What is the Nextion 3.5 inch HMI display and what is it used for?

Touch display with its own processor; you design screens in the Nextion editor. Makers use it for machine panels.

How it works

A TFT with its own processor that stores the UI and does the drawing, so the board only sends short commands.

Key specifications

Display specValue
TypeTFT HMI with resistive touch
Size3.5 inch
Resolution480 × 320
InterfaceUART
Supply voltage5 V

Pinout

5VPower
TXTo the board's RX
RXFrom the board's TX
GNDGround

How to use it

Design screens in Nextion Editor and upload by microSD or serial. The board sends text commands that end with three 0xFF bytes and gets touch events back. Use a supply that can give at least 500 mA.

Applications

Alternatives

Buy at

Common questions

What is the Nextion 3.5 inch HMI display used for?

In maker projects: machine panels.

How does the Nextion 3.5 inch HMI display work?

A TFT with its own processor that stores the UI and does the drawing, so the board only sends short commands.

What voltage does the Nextion 3.5 inch HMI display need?

5 V.

How do I connect the Nextion 3.5 inch HMI display to an Arduino or ESP32?

UART. Pins: 5V (Power), TX (To the board's RX), RX (From the board's TX), GND (Ground).

What can I use instead of the Nextion 3.5 inch HMI display?

3.5 inch TFT SPI (ILI9488) and Nextion 7 inch HMI display.