Idea
In short
How do you build a headphone preamp with NE5532?
A dual low-noise op-amp boosts a weak microphone or line signal for headphones. You need NE5532 dual low-noise op-amp, Potentiometer 100 kΩ (linear), Electrolytic Capacitor 100 µF × 2, Electrolytic capacitor 10 µF × 2, Resistor 47 kΩ × 2, Audio jack 3.5 mm (PCB, stereo) × 2 and Dual-rail ±12 V DC-DC module.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Design a low noise audio gain stage.
Parts list
- Integrated Circuits
- Passives
- Passives
- Passives
- PassivesResistor 47 kΩ × 2
- Connectors
- Power
How to build it
- Set the gain with the feedback resistors
- Add input and output coupling capacitors
- Supply from a dual rail
- Check noise with headphones
- Add a gain switch
Related projects
Common questions
What parts do I need for the headphone preamp with NE5532?
NE5532 dual low-noise op-amp, Potentiometer 100 kΩ (linear), Electrolytic Capacitor 100 µF × 2, Electrolytic capacitor 10 µF × 2, Resistor 47 kΩ × 2, Audio jack 3.5 mm (PCB, stereo) × 2 and Dual-rail ±12 V DC-DC module.
How long does the headphone preamp with NE5532 take to build?
About 150 minutes for a intermediate maker.
