Projects / Ideas / Tilt angle logger with the built-in IMU

Tilt angle logger with the built-in IMU

IntermediateMotionIdeaReviewed
In short

How do you build a tilt angle logger with the built-in IMU?

The motion chip on a small Wi-Fi board measures tilt, and the angle is logged over serial to a chart. You need Arduino Nano 33 IoT, USB A to micro-USB cable (data) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 150 min
Parts
3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use a built-in IMU.

Parts list

How to build it

  1. Read the accelerometer
  2. Work out pitch and roll
  3. Smooth the readings
  4. Print them
  5. Plot the angles

Related projects

Common questions

What parts do I need for the tilt angle logger with the built-in IMU?

Arduino Nano 33 IoT, USB A to micro-USB cable (data) and Breadboard 830 Tie Points.

How long does the tilt angle logger with the built-in IMU take to build?

About 150 minutes for a intermediate maker.