Projects / Ideas / Double-tap counter

Double-tap counter

IntermediateMotionIdeaReviewed
NANOADXL345tilt 37°SSD1306Idea
In short

How do you build a double-tap counter?

An accelerometer with built-in tap detection counts single and double taps on a table and shows both totals. You need Arduino Nano, ADXL345 IC, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use hardware tap detection.

Parts list

How to build it

  1. Wire the sensor on I2C
  2. Enable tap detection
  3. Set threshold and timing
  4. Count single and double taps
  5. Show totals

Related projects

Common questions

What parts do I need for the double-tap counter?

Arduino Nano, ADXL345 IC, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the double-tap counter take to build?

About 210 minutes for a intermediate maker.