Components / Boards / Arduino Nano 33 IoT

Arduino Nano 33 IoT

3.3 V Nano with Wi-Fi, Bluetooth and a 6-axis IMU.

MicrocontrollerSAMD21 Cortex-M0+ 48 MHz
Flash256 KB
RAM32 KB
Logic level3.3 V (not 5 V tolerant)
Development BoardsReviewedMPN ABX00027Used in 1 project
NANO
In short

What is the Arduino Nano 33 IoT and what is it used for?

3.3 V Nano with Wi-Fi, Bluetooth and a 6-axis IMU. Makers use it for connected wearables, motion projects.

How it works

A SAMD21 Cortex-M0+ for your code and a u-blox NINA-W102 (ESP32) module that handles Wi-Fi and Bluetooth.

Key specifications

Development board specValue
MicrocontrollerSAMD21 Cortex-M0+ 48 MHz
Flash256 KB
RAM32 KB
Logic level3.3 V (not 5 V tolerant)
I/O pins14 digital, 8 analog
WirelessWi-Fi and Bluetooth (u-blox NINA-W102)

Pinout

3.3V3.3 V out
VIN5 to 18 V in
5VDisconnected by default (solder the VUSB jumper)
A4 A5I2C
1112 13SPI
01Serial1
13LED

How to use it

Install the SAMD Boards package and the WiFiNINA library. Pins are 3.3 V only and 5 V on any pin will damage the board. It also has an LSM6DS3 IMU and an ECC608 crypto chip.

Applications

Alternatives

Buy at

Common questions

What is the Arduino Nano 33 IoT used for?

In maker projects: connected wearables, motion projects.

How does the Arduino Nano 33 IoT work?

A SAMD21 Cortex-M0+ for your code and a u-blox NINA-W102 (ESP32) module that handles Wi-Fi and Bluetooth.

What can I use instead of the Arduino Nano 33 IoT?

Arduino Nano ESP32 and Arduino Nano RP2040 Connect.