Projects / Ideas / Compass heading box

Compass heading box

IntermediateSensorsIdeaReviewed
In short

How do you build a compass heading box?

A nine-axis motion chip gives a compass heading that is tilt corrected and shown on a small display. You need Arduino Nano, MPU9250 9-axis IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a tilt-corrected compass.

How to build it

  1. Read the magnetometer
  2. Calibrate by turning the board
  3. Work out the heading
  4. Correct for tilt
  5. Show the compass point

Related projects

Common questions

What parts do I need for the compass heading box?

Arduino Nano, MPU9250 9-axis IMU, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the compass heading box take to build?

About 210 minutes for a intermediate maker.