Projects / Ideas / MOSFET motor speed control lab

MOSFET motor speed control lab

BeginnerMotionIdeaReviewed
In short

How do you build an MOSFET motor speed control lab?

Control a small DC motor's speed with PWM and a MOSFET, then measure how current and speed change. You need Arduino Uno R3, IRFZ44N N-channel MOSFET, DC motor 130 size (toy motor), Rectifier Diode 1N4007, Resistor 220 Ω, Resistor 10 kΩ, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use PWM to control motor speed.

How to build it

  1. Wire the low-side MOSFET
  2. Add a flyback diode
  3. Set PWM from a pot
  4. Measure speed with a smartphone tachometer app
  5. Plot duty against speed

Related projects

Common questions

What parts do I need for the MOSFET motor speed control lab?

Arduino Uno R3, IRFZ44N N-channel MOSFET, DC motor 130 size (toy motor), Rectifier Diode 1N4007, Resistor 220 Ω, Resistor 10 kΩ, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

How long does the MOSFET motor speed control lab take to build?

About 150 minutes for a beginner maker.