Idea
In short
How do you build a discrete H-bridge motor driver?
Build an H-bridge from four power transistors to understand how motor drivers reverse a motor. You need Arduino Uno R3, TIP120 Darlington transistor × 2, TIP127 PNP Darlington × 2, DC motor 130 size (toy motor), Resistor 1 kΩ × 4, Rectifier Diode 1N4007 × 4 and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 270 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn H-bridge operation and shoot-through.
Parts list
- Development Boards
- Semiconductors
- Semiconductors
- Motors & Actuators
- PassivesResistor 1 kΩ × 4
- Semiconductors
- Prototyping
How to build it
- Build the high and low side switches
- Add flyback diodes
- Add an interlock so both sides never turn on together
- Test forward and reverse
- Add PWM speed control
Common questions
What parts do I need for the discrete H-bridge motor driver?
Arduino Uno R3, TIP120 Darlington transistor × 2, TIP127 PNP Darlington × 2, DC motor 130 size (toy motor), Resistor 1 kΩ × 4, Rectifier Diode 1N4007 × 4 and Breadboard 830 Tie Points.
How long does the discrete H-bridge motor driver take to build?
About 270 minutes for a advanced maker.
