How do you build a wild animal deterrent with lights and sound?
A microwave radar sensor detects animals entering a field at night and flashes bright LEDs and sounds a siren to scare off boar and nilgai. You need Arduino Nano, RCWL-0516 microwave radar motion sensor, High-power LED 3 W (star) × 4, LED driver 350 mA constant current, Buzzer 12 V continuous (piezo alarm), Relay Module 5V, 12 V 2 A DC adapter and Waterproof enclosure IP65 (junction box).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 8
Use a radar motion sensor that works in the dark and through light foliage.
Parts list
- Development Boards
- Sensors
- Optoelectronics
- Optoelectronics
- Motors & Actuators
- Interfaces
- Power
- Mechanical & Hardware
How to build it
- Mount the RCWL-0516 facing the field edge
- Flash the LEDs in a random pattern for 20 s on detection
- Sound the siren in short bursts
- Lock out for 2 minutes to save the battery
- Use a solar panel and lead-acid battery in remote fields
Common questions
What parts do I need for the wild animal deterrent with lights and sound?
Arduino Nano, RCWL-0516 microwave radar motion sensor, High-power LED 3 W (star) × 4, LED driver 350 mA constant current, Buzzer 12 V continuous (piezo alarm), Relay Module 5V, 12 V 2 A DC adapter and Waterproof enclosure IP65 (junction box).
How long does the wild animal deterrent with lights and sound take to build?
About 180 minutes for a intermediate maker.
