Idea
In short
How do you build a seedling mat thermostat with a display?
An AHT20 and a relay keep a low-voltage seedling mat at a set temperature, with the setting changed by an encoder. You need Arduino Nano, AHT20 temperature and humidity sensor, Relay Module 5V, Rotary encoder module (KY-040), SSD1306 OLED Display and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run an on-off thermostat with hysteresis.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Displays
- Power
How to build it
- Read the temperature
- Use hysteresis of one degree
- Switch a 12 V mat through the relay
- Set the target with the encoder
- Warn when it does not warm
Common questions
What parts do I need for the seedling mat thermostat with a display?
Arduino Nano, AHT20 temperature and humidity sensor, Relay Module 5V, Rotary encoder module (KY-040), SSD1306 OLED Display and 12 V 2 A DC adapter.
How long does the seedling mat thermostat with a display take to build?
About 120 minutes for a intermediate maker.
