Projects / Ideas / PCB drilling quality lab

PCB drilling quality lab

IntermediateHome LabIdeaReviewed
In short

How do you build a PCB drilling quality lab?

Drill test holes in scrap copper board at a few speeds and with the board held in different ways, then examine the holes for burrs and tear-out. You find the settings that give neat holes. Wear eye protection, hold the board firmly and avoid breathing fibreglass dust. You need Mini drill (PCB, 12 V), Copper clad board (single side) 10 × 15 cm and USB microscope.

Level
Intermediate
Time
About 60 min
Parts
3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Drill clean holes in a home-made PCB.

Parts list

How to build it

  1. Clamp a scrap board
  2. Drill at the lowest speed
  3. Drill at higher speeds
  4. Backing board or none
  5. Compare under the microscope

Related projects

Common questions

What parts do I need for the PCB drilling quality lab?

Mini drill (PCB, 12 V), Copper clad board (single side) 10 × 15 cm and USB microscope.

How long does the PCB drilling quality lab take to build?

About 60 minutes for a intermediate maker.