Projects / Ideas / Mega 2560 four-servo arm controller

Mega 2560 four-servo arm controller

IntermediateRoboticsIdeaReviewed
In short

How do you build a mega 2560 four-servo arm controller?

An Arduino Mega 2560 reads four potentiometers and moves four SG90 servos on a small arm, with smooth moves between positions. Power the servos from their own 5 V supply. You need Arduino Mega 2560 (CH340 clone), Potentiometer 10 kΩ × 4, SG90 Micro Servo × 4 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 170 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control a four-joint arm with knobs.

Parts list

How to build it

  1. Wire the four knobs to analog pins
  2. Wire the servos with a separate supply
  3. Map each knob to its servo
  4. Smooth the moves
  5. Add a limit to each joint

Related projects

Common questions

What parts do I need for the mega 2560 four-servo arm controller?

Arduino Mega 2560 (CH340 clone), Potentiometer 10 kΩ × 4, SG90 Micro Servo × 4 and Breadboard 830 Tie Points.

How long does the mega 2560 four-servo arm controller take to build?

About 170 minutes for a intermediate maker.