Projects / Ideas / Two-board RS-485 chat

Two-board RS-485 chat

IntermediateCommunicationIdeaReviewed
In short

How do you build a two-board RS-485 chat?

Two boards talk over a twisted pair with RS-485 chips, the same signalling used in factory sensors, with a termination test. You need Arduino Nano × 2, MAX485 RS-485 transceiver × 2, Resistor 100 kΩ, Resistor 330 Ω and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Link boards with RS-485.

Parts list

How to build it

  1. Wire each chip with direction control
  2. Send a message
  3. Add termination
  4. Lengthen the cable
  5. Count errors

Related projects

Common questions

What parts do I need for the two-board RS-485 chat?

Arduino Nano × 2, MAX485 RS-485 transceiver × 2, Resistor 100 kΩ, Resistor 330 Ω and Breadboard 830 Tie Points.

How long does the two-board RS-485 chat take to build?

About 180 minutes for a intermediate maker.