Projects / Ideas / RS-485 two-node link

RS-485 two-node link

IntermediateCommunicationIdeaReviewed
In short

How do you build an RS-485 two-node link?

Two MAX485 boards carry serial data over a long twisted pair, with a master polling a slave. You need Arduino Nano × 2, MAX485 RS-485 transceiver × 2, Resistor 330 Ω × 2 and 16x2 LCD with I2C backpack (PCF8574).

Level
Intermediate
Time
About 120 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Use differential signalling for robust wiring.

Parts list

How to build it

  1. Wire the driver direction pin
  2. Terminate the line
  3. Poll the slave for a reading
  4. Reply with the value
  5. Test with a long cable

Related projects

Common questions

What parts do I need for the RS-485 two-node link?

Arduino Nano × 2, MAX485 RS-485 transceiver × 2, Resistor 330 Ω × 2 and 16x2 LCD with I2C backpack (PCF8574).

How long does the RS-485 two-node link take to build?

About 120 minutes for a intermediate maker.