Idea
In short
How do you build a clap counter?
A microphone amplifier counts claps and shows the count, with a delay so one clap is not counted twice. You need Arduino Nano, MAX4466 microphone module, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count loud sounds.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the microphone
- Find the quiet level
- Set a clap threshold
- Count with a lockout
- Reset on a double clap
Common questions
What parts do I need for the clap counter?
Arduino Nano, MAX4466 microphone module, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the clap counter take to build?
About 150 minutes for a beginner maker.
