Projects / Ideas / Cold junction compensation lab

Cold junction compensation lab

AdvancedTest & MeasurementIdeaReviewed
In short

How do you build a cold junction compensation lab?

A thermocouple amplifier reports the hot and the board temperature so you can see how cold-junction compensation works. You need Arduino Nano, MAX31855 thermocouple amplifier, SSD1306 OLED Display and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Understand thermocouple basics.

How to build it

  1. Wire the amplifier on SPI
  2. Read hot and internal values
  3. Warm the board gently
  4. Watch both readings
  5. Detect an open probe fault

Related projects

Common questions

What parts do I need for the cold junction compensation lab?

Arduino Nano, MAX31855 thermocouple amplifier, SSD1306 OLED Display and Breadboard 830 Tie Points.

How long does the cold junction compensation lab take to build?

About 300 minutes for a advanced maker.