Projects / Ideas / Pulse waveform viewer

Pulse waveform viewer

IntermediateHealthIdeaReviewed
In short

How do you build a pulse waveform viewer?

A MAX30100 shows the pulse waveform from a fingertip on an OLED, a way to see what a plethysmograph looks like. It is for learning, not diagnosis. You need Arduino Nano, Pulse oximeter MAX30100 and SSD1306 OLED Display.

Level
Intermediate
Time
About 120 min
Parts
3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Read and plot a fingertip pulse signal.

Parts list

How to build it

  1. Read the infrared channel
  2. Remove the DC offset
  3. Smooth the signal
  4. Draw the waveform
  5. Estimate beats per minute for learning only

Related projects

Common questions

What parts do I need for the pulse waveform viewer?

Arduino Nano, Pulse oximeter MAX30100 and SSD1306 OLED Display.

How long does the pulse waveform viewer take to build?

About 120 minutes for a intermediate maker.