Pulse oximeter MAX30100
Older pulse oximeter chip; the MAX30102 is the better choice.
MeasuresHeart rate and SpO2 (optical)
InterfaceI2C
I2C address0x57
Supply voltage1.8 V + 3.3 V
SensorsReviewedMPN MAX30100Used in 1 project
In short
What is the Pulse oximeter MAX30100 and what is it used for?
Older pulse oximeter chip; the MAX30102 is the better choice. Makers use it for heart rate demos.
How it works
Red and IR LEDs with a photodiode, like the MAX30102.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Heart rate and SpO2 (optical) |
| Interface | I2C |
| I2C address | 0x57 |
| Supply voltage | 1.8 V + 3.3 V |
Pinout
VIN1.8 V and 3.3 V needed (modules provide them from VIN)
GNDGround
SCLI2C clock
SDAI2C data
INTInterrupt
How to use it
Use the MAX30100lib library. Many purple modules pull I2C up to 1.8 V and fail with 5 V or 3.3 V boards until the pull-ups are changed. Not a medical device.
Applications
Heart rate demos
Builds that use it
Alternatives
- MAX30102 pulse oximeter and heart rate sensorNewer version, better supported
Common questions
What is the Pulse oximeter MAX30100 used for?
In maker projects: heart rate demos.
How does the Pulse oximeter MAX30100 work?
Red and IR LEDs with a photodiode, like the MAX30102.
What voltage does the Pulse oximeter MAX30100 need?
1.8 V + 3.3 V.
How do I connect the Pulse oximeter MAX30100 to an Arduino or ESP32?
I2C. Pins: VIN (1.8 V and 3.3 V needed (modules provide them from VIN)), GND (Ground), SCL (I2C clock), SDA (I2C data), INT (Interrupt).
What can I use instead of the Pulse oximeter MAX30100?
MAX30102 pulse oximeter and heart rate sensor.
