Idea
In short
How do you build a skin conductance mood meter?
A simple two-finger sensor measures skin conductance and graphs how it changes when you are startled or relaxed, as a science demo. You need Arduino Nano, Galvanic skin response sensor, SSD1306 OLED Display, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
- Level
- Intermediate
- Time
- About 90 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure a small changing conductance safely.
Parts list
- Development Boards
- Sensors
- Displays
- Batteries
- Power
How to build it
- Wire the sensor and power from a battery
- Place the fingers on the electrodes
- Record a baseline
- Startle with a sound and watch the rise
- Plot the response, treating it as a toy and not a lie detector
Common questions
What parts do I need for the skin conductance mood meter?
Arduino Nano, Galvanic skin response sensor, SSD1306 OLED Display, 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
How long does the skin conductance mood meter take to build?
About 90 minutes for a intermediate maker.
