Idea
In short
How do you build a dual sensor temperature difference?
Two temperature sensors show the difference between inlet and outlet air through a small duct. You need Arduino Nano, LM75 temperature sensor × 2, SSD1306 OLED Display, 5 V DC fan 40 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure temperature difference.
Parts list
- Development Boards
- Sensors
- Displays
- Motors & Actuators
- Prototyping
How to build it
- Set the two I2C addresses
- Read both
- Show the difference
- Add a fan
- Plot against fan speed
Common questions
What parts do I need for the dual sensor temperature difference?
Arduino Nano, LM75 temperature sensor × 2, SSD1306 OLED Display, 5 V DC fan 40 mm and Breadboard 830 Tie Points.
How long does the dual sensor temperature difference take to build?
About 210 minutes for a intermediate maker.
