Components / Sensors / LM75 temperature sensor

LM75 temperature sensor

Digital temperature sensor with an over-temperature output.

MeasuresTemperature
Range−55 to 125 °C
Accuracy±2 °C
InterfaceI2C
SensorsReviewedMPN LM75AUsed in 2 projects
LM75
In short

What is the LM75 temperature sensor and what is it used for?

Digital temperature sensor with an over-temperature output. Makers use it for board temperature monitoring.

How it works

An on-chip band-gap temperature sensor with an ADC and thermostat comparator.

Key specifications

Sensor specValue
MeasuresTemperature
Range−55 to 125 °C
Accuracy±2 °C
InterfaceI2C
I2C address0x48 to 0x4F
Supply voltage2.8 to 5.5 V

Pinout

VCC2.8 to 5.5 V
GNDGround
SDAI2C data
SCLI2C clock
OSOver-temperature output
A0, A1, A2Address select 0x48 to 0x4F

How to use it

Read two bytes from register 0; up to eight sensors can share a bus with different address pins. OS can switch a fan by itself at a set temperature.

Applications

Alternatives

Buy at

Common questions

What is the LM75 temperature sensor used for?

In maker projects: board temperature monitoring.

How does the LM75 temperature sensor work?

An on-chip band-gap temperature sensor with an ADC and thermostat comparator.

What voltage does the LM75 temperature sensor need?

2.8 to 5.5 V.

How do I connect the LM75 temperature sensor to an Arduino or ESP32?

I2C. Pins: VCC (2.8 to 5.5 V), GND (Ground), SDA (I2C data), SCL (I2C clock), OS (Over-temperature output), A0, A1, A2 (Address select 0x48 to 0x4F).

What can I use instead of the LM75 temperature sensor?

TMP117 precision temperature sensor and MCP9808 temperature sensor.