Idea
In short
How do you build a hall tachometer?
A linear Hall module and a small magnet on a fan or wheel measure revolutions per minute. You need Arduino Nano, Hall effect sensor module (KY-024, linear), Neodymium magnets (10 × 3 mm), 5 V DC fan 40 mm, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure speed with a Hall module.
Parts list
- Development Boards
- Sensors
- Mechanical & Hardware
- Motors & Actuators
- Displays
- Prototyping
How to build it
- Fix the magnet to the blade
- Mount the sensor beside it
- Count pulses
- Convert to rpm
- Smooth the reading
Common questions
What parts do I need for the hall tachometer?
Arduino Nano, Hall effect sensor module (KY-024, linear), Neodymium magnets (10 × 3 mm), 5 V DC fan 40 mm, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the hall tachometer take to build?
About 210 minutes for a intermediate maker.
