Photodiode / IR receiver diode (5 mm black)
IR photodiode that pairs with an IR LED for beam-break sensing.
Colour / typeIR receiver, 940 nm
Package5 mm black epoxy
PolarityUse reverse biased with a resistor
OptoelectronicsReviewedMPN IR photodiode 5mmUsed in 3 projects
In short
What is the Photodiode / IR receiver diode (5 mm black) and what is it used for?
IR photodiode that pairs with an IR LED for beam-break sensing. Makers use it for counters and beam alarms.
How it works
Infrared light frees charge in the junction, letting a small reverse current flow. The black epoxy blocks visible light.
Key specifications
| LED and switch spec | Value |
|---|---|
| Colour / type | IR receiver, 940 nm |
| Package | 5 mm black epoxy |
| Polarity | Use reverse biased with a resistor |
Pinout
Long leadAnode
Short leadCathode
How to use it
Reverse-bias it with a 10 kΩ to 100 kΩ resistor and read the voltage, or feed an LM358 comparator. Pair with an IR LED for line or obstacle sensing.
Applications
Counters and beam alarms
Builds that use it
Alternatives
- Phototransistor L14F1 / PT333More output
- IR receiver VS1838BFor remote controls
Common questions
What is the Photodiode / IR receiver diode (5 mm black) used for?
In maker projects: counters and beam alarms.
How does the Photodiode / IR receiver diode (5 mm black) work?
Infrared light frees charge in the junction, letting a small reverse current flow. The black epoxy blocks visible light.
What can I use instead of the Photodiode / IR receiver diode (5 mm black)?
Phototransistor L14F1 / PT333 and IR receiver VS1838B.
