Idea
In short
How do you build a crystal-free AM radio tuner?
A coil, a variable capacitor and a diode pick up a strong local AM station with no battery. You need Inductor 1 mH, Potentiometer 10 kΩ, Signal Diode 1N4148, Ceramic Capacitor 100 nF, Piezo disc buzzer element and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Learn resonance with an LC tuned circuit.
Parts list
- Passives
- Passives
- Semiconductors
- Passives
- Motors & Actuators
- Prototyping
How to build it
- Wind or use an inductor
- Tune with a variable capacitor
- Detect with the diode
- Listen with a high-impedance earpiece
- Add a long wire antenna
Common questions
What parts do I need for the crystal-free AM radio tuner?
Inductor 1 mH, Potentiometer 10 kΩ, Signal Diode 1N4148, Ceramic Capacitor 100 nF, Piezo disc buzzer element and Breadboard 830 Tie Points.
How long does the crystal-free AM radio tuner take to build?
About 240 minutes for a intermediate maker.
