Projects / Ideas / Four-lamp latching panel

Four-lamp latching panel

BeginnerLearningIdeaReviewed
In short

How do you build a four-lamp latching panel?

Four latching push buttons switch four lamps on and off, a first panel to learn latching and momentary switches. You need Push button (latching, 7 mm panel) × 4, LED 5 mm red × 4, Resistor 330 Ω × 4, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

Level
Beginner
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a small switch panel.

How to build it

  1. Learn latching and momentary
  2. Wire one lamp
  3. Wire four
  4. Label the panel
  5. Measure total current

Related projects

Common questions

What parts do I need for the four-lamp latching panel?

Push button (latching, 7 mm panel) × 4, LED 5 mm red × 4, Resistor 330 Ω × 4, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.

How long does the four-lamp latching panel take to build?

About 90 minutes for a beginner maker.