Projects / Ideas / Bubble level with 10-axis board

Bubble level with 10-axis board

IntermediateMotionIdeaReviewed
In short

How do you build a bubble level with 10-axis board?

A 10-axis board measures tilt and shows a bubble on the display, with a zero button to calibrate on any surface. You need Arduino Nano, GY-87 10DOF IMU module, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show tilt as a bubble.

How to build it

  1. Wire the board
  2. Read the accelerometer
  3. Compute roll and pitch
  4. Draw a bubble
  5. Add a zero button

Related projects

Common questions

What parts do I need for the bubble level with 10-axis board?

Arduino Nano, GY-87 10DOF IMU module, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.

How long does the bubble level with 10-axis board take to build?

About 210 minutes for a intermediate maker.