Projects / Ideas / Sound-reactive night light

Sound-reactive night light

BeginnerLightingIdeaReviewed
In short

How do you build a sound-reactive night light?

A sound sensor makes a lamp brighten for a few seconds at a clap or loud step, handy for a hallway. You need Arduino Nano, Sound sensor module (KY-038), MOSFET IRLZ44N, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

React to sound with a timed light.

How to build it

  1. Read the sound level
  2. Set a threshold
  3. Fade the light on
  4. Hold for ten seconds
  5. Fade off

Related projects

Common questions

What parts do I need for the sound-reactive night light?

Arduino Nano, Sound sensor module (KY-038), MOSFET IRLZ44N, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.

How long does the sound-reactive night light take to build?

About 150 minutes for a beginner maker.