Idea
In short
How do you build a hallway light with radar and lux?
A microwave radar and a light sensor turn a hallway strip on only when someone is there and it is dark, fading smoothly. You need Arduino Nano, RCWL-0516 microwave radar motion sensor, BH1750 light sensor, 12 V LED strip warm white (5 m, 2835), MOSFET IRLZ44N and 12 V 2 A DC adapter.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine two sensors with sensible rules.
Parts list
- Development Boards
- Sensors
- Sensors
- Optoelectronics
- Semiconductors
- Power
How to build it
- Read motion and light level
- Switch on only when dark and moving
- Fade up and fade down
- Hold for 30 seconds after the last movement
- Tune the sensitivity of the radar
Common questions
What parts do I need for the hallway light with radar and lux?
Arduino Nano, RCWL-0516 microwave radar motion sensor, BH1750 light sensor, 12 V LED strip warm white (5 m, 2835), MOSFET IRLZ44N and 12 V 2 A DC adapter.
How long does the hallway light with radar and lux take to build?
About 120 minutes for a intermediate maker.
