Idea
In short
How do you build a single drum pad?
A knock sensor under a pad plays a sample sound each time you hit it, and louder hits play louder. You need Arduino Nano, Knock sensor module (KY-031), Piezo vibration sensor (disc), Passive buzzer, Resistor 1 kΩ and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read impact strength and trigger sound.
Parts list
- Development Boards
- Sensors
- Sensors
- Motors & Actuators
- Passives
- Prototyping
How to build it
- Read the knock peak
- Set a threshold
- Map strength to volume
- Play a tone
- Add a short cooldown
Related projects
Common questions
What parts do I need for the single drum pad?
Arduino Nano, Knock sensor module (KY-031), Piezo vibration sensor (disc), Passive buzzer, Resistor 1 kΩ and Breadboard 830 Tie Points.
How long does the single drum pad take to build?
About 180 minutes for a intermediate maker.
